Jenkins Springs Pty Ltd
BASSENDEAN WA 6934
ATTENTION: Mr James
McCully
Dear Mr McCully
The application for a Identification Plate Approval, your reference
number J4544CA01, our reference number 51677, lodged for Jenkins Springs Pty Ltd, has been approved.
Your approval number is 51677 and
the approval documents are attached.
Yours sincerely
Umesh Shamdasani
Associate
Administrator of Vehicle Standards
04 August 2021
Department of Infrastructure,
transport, Cities and Regional Development
Issue date: 15 July 2021
The
Associate Administrator of Vehicle Standards (the Associate Administrator)
approves the affixing, by the Licensee named and described in Schedule 1 (the
Licensee) to a vehicle of the kind described in Schedule 2 which conforms to
the design as specified in the evidence items listed in Schedule 4 (the
specified vehicle) which the Licensee has certified complies with the
Australian Design Rules specified in Schedule 4, of an Identification Plate of
the colour specified in Schedule 3, that conforms with the Administrator’s
circular 0-3-2, and which contains the information shown in Schedule 2 (with
the typical VIN replaced with the relevant VIN).
In this approval, a reference to an Australian Design
Rule is a reference to a rule cited in the National Standard determinations,
made under section 7 of the Motor Vehicle Standards Act, together with that
rule’s distinguishing number.
The licensee must pay a fee to the
Commonwealth, in accordance with Regulation 60 and Items 1 and 2 of Schedule 2
of the Motor Vehicle Standards Regulations, for the placement of an
identification plate on each new vehicle supplied to the market in
This approval is subject to the following
conditions.
1. The
Licensee shall not affix the Identification Plate to a vehicle that is not a
specified vehicle.
2. The
Licensee must not place Identification Plates on vehicles which do not comply
with all of the Australian Design Rules specified in Schedule 4.
3. The
Licensee shall not without the prior approval of the Administrator affix the
Identification Plate to a vehicle that is in any way different from the vehicle
described in the final form of the application for this Approval. The application
includes reports and other documents relating to the application.
4. The
Licensee shall by detailed quality control and test ensure continuing
compliance with such of the Australian Design Rules specified in Schedule 4.
5. The
Licensee shall maintain records of detailed quality control and test
documentation.
6. The
Licensee shall supply upon request, to the satisfaction of the Administrator,
any additional information for the purpose of demonstrating compliance with
such of the Australian Design Rules specified in Schedule 4.
7. The
Licensee shall not affix the Identification Plate to a vehicle on or after the
implementation date for a new Australian Design Rule applicable to the
specified vehicle.
8. The
Licensee shall not affix the Identification Plate to a vehicle on or after the
Expiry date specified in Schedule 3 (if any).
9. The
Identification Plate shall be affixed to the vehicle to which it relates in the
position specified as Plate Location in Schedule 3.
10. On
cessation of marketing the specified vehicle in
11. The
Licensee shall also comply with the additional conditions specified in Schedule
5.
Approval No.: 51677 Issue Date: 15 July 2021
Schedule
1
Jenkins Springs Pty Ltd
188 Railway Parade
BASSENDEAN
WA
6054
Schedule
2
Make :
WCS MAZDA
Model :
BT-50C HD
Category :
NA
Manufactured by :
Jenkins Springs Pty Ltd
Typical VIN :
MP2TFS40JL*100001
Seating Capacity :
5; 2
GVM :
3.45 tonne TO 3.45 tonne
Schedule
3
Expiry date : Life of Model
Plate location : RH DOOR
JAMB ADJACENT TO ORIGINAL COMPLIANCE PLATE ON B PILLAR
Plate colour : SILVER
SECOND STAGE
OF MANUFACTURE
Umesh Shamdasani
Associate Administrator
of Vehicle Standards
15 July 2021
Please note: If
you do not comply with a condition specified in this Approval the Administrator
may, after giving you notice, revoke the Approval.
Approval No.: 51677 Issue Date: 15 July 2021
Schedule
4
ADR Document Reference from evidence item
01/00
J45440100A0
02/01
J45440201A0
03/04 (also satisfying 03/03) J45440304A0
03/04 J45440304A0
04/06 (also satisfying 04/05) J45440406A0
04/06
J45440406A0
05/06 (also satisfying 05/05) J45440506A0
05/06
J45440506A0
06/00
J45440600A0
08/01
J45440801A0
11/00
J45441100A0
13/00
J45441300A0
14/02
J45441402A0
18/03
J45441803A0
23/03
J45442303A0
25/02
J45442502A0
30/01
J45443001A0 (Minor
Non-Compliance, see Schedule 5)
35/05 (also satisfying 31/04) J45443505A0
35/06 (also satisfying 31/04) J45443506A0
34/03
J45443403A0
35/05
J45443505A0
35/06 (also satisfying 35/05) J45443506A0
35/06
J45443506A0
35/06SF
J45443506FA0
42/04 J45444204A0
42/05 (also satisfying 42/04) J45444205A0
42/05
J45444205A0
43/04
J45444304A0
46/00 J45444600A0
47/00
J45444700A0
48/00
J45444800A0
49/00
J45444900A0
50/00 J45445000A0
51/00
J45445100A0
61/02
J45446102A0
76/00
J45447600A0
79/04 J45447904A0
81/02
J45448102A0
83/00
J45448300A0
85/00
J45448500A0
88/00 J45448800A0
89/00
J45448900A0
90/00
J45449000A0
92/00
J45449200A0
93/00 J45449300A0
94/00
J45449400A0
95/00
J45449500A0
23/03 (also satisfying 96/00) J45442303A0
Approval No.: 51677 Issue Date: 15 July 2021
Schedule
5
THIS
APPROVAL WILL REMAIN IN FORCE UNTIL THE END OF THE TRANSITIONAL PERIOD AS
DEFINED IN THE ROAD VEHICLE STANDARDS (CONSEQUENTIAL AND TRANSITIONAL
PROVISIONS) ACT 2018.
1.
This approval is for second-stage-of-manufacture WCS MAZDA BT-50C HD based on
first-stage Approval No. 50871 MAZDA BC-50C issued on 4 Jun 2020.
2.
The Licensee must obtain all second-stage Identification Plates from the
Administrator, as per the contract approved by the Administrator for the supply
of Identification Plates, currently with:
Niddrie
Nameplates Pty Ltd
Niddrie
VIC
3042
Phone: (03) 9335 2977
Facsimile:
(03) 9335 4357
3. The vehicle is not compliant with ADR
30/01. The Administrator has allowed
this non-compliance of the WCS MAZDA BT-50C HD vehicle type to ADR 30/01 under
an interim arrangement, due to compliance of the vehicle with ADR 79/04.
4. The specified non-compliance is minor and
inconsequential.
5.
The 'chassis-cab' variants of the WCS MAZDA BT-50C HD vehicle type do not
comply with the position requirements of ADR13/00 for the following lamps and
reflectors:
- reversing lamps
- rear direction indicator lamps
- rear reflex reflectors
- rear registration plate lamps
- rear position (side) lamps
- stop lamps
6.
The 'chassis-cab' variants of the WCS MAZDA BT-50C HD vehicle type do not
comply with:
- clause 14.2 of ADR42/04 for wheel guards on
the rearmost wheels.
- clause 9.1.1.1 of ADR61/02 for provision of
a rear registration plate.
7.
The manufacturer must provide instructions, guidelines and references to the
relevant ADRs, that must be met, to whoever is responsible for completing
chassis-cab vehicles certified in accordance with Circular 0-4-11 prior to
their supply to the market.
8. Use of these 'chassis-cab' vehicles certified
in accordance with Circular 0-4-11 are therefore subject to any conditions that
may be imposed by the relevant Registering Authorities